 |
|
|
|
|
|
|
|
|
|
|
 |
Datasheet : Glo Brite water based Photoluminescent Coating |
| Return to main photoluminescent coatings page |
Description :
One component water based Thixotropic Photoluminescent safety coating.
|
|
Recommended use :
To be used in conjunction with Glo Brite Primer A base coat (order no C01) and Glo Brite protection lacquer WR surface coat (order no C30).
|
| Internal |
Wood, concrete, metal and brickwork |
| External |
Wood, concrete and brickwork |
|
| Physical constants :
|
| Flash point |
NIL |
| Finish |
Flat |
| Colour |
Standard Photoluminescent neutral light yellow/green |
| Solids by volume |
47% |
| Specific gravity |
1.4 kg/litre |
| Practical spreading rate |
4 square metres per litre |
| Drying time |
2 hours at 20 degrees C / 68 degrees F |
| Recoating time |
Approximately 2 hours |
| Shelf life |
1 year in dry place above 5 degrees C |
|
| Application details :
|
| Conventional spray |
1 coat @ 200 microns WFT |
| Brush |
1 coat @ 150 microns WFT |
| Roller |
1 coat @ 150 microns WFT |
|
| For best results it is recommended that 2 coats be applied when using brush or roller. Surfaces to be clean and dry with temperatures
above dew point to avoid condensation. When measurement of wet film is not possible, dry film should look even, white and opaque. |
|
| Spraying thinning |
Up to 10% fresh clean water can be used for thinning. Note: equipment should be cleaned immediately
after use with clean water. Recommended air pressure for conventional spraying is 30 psi. |
| Surface preparation |
All surfaces must be sound and free from oil, grease, dust and powder. |
| Health & safety precautions |
This coating presents no fire or toxicity hazard. Accidental splashes on the skin or in the eyes should be removed at once with fresh clean water. |
|
| Return to main photoluminescent coatings page |
|
|
 |
|
 |
|
|
|
Glo Brite Ltd, 530 Woodbridge Road, Ipswich, Suffolk, IP4 4PN, England
Tel : (01473) 721561 - Fax : (01473) 714069 - Email : sales@globriteltd.com
http://www.globriteltd.com - Copyright © 2010 Glo Brite Ltd
GLO BRITE Photoluminescent material is manufactured by, and is the tradename of, Glo Brite Ltd.
|
|
|
|
|
